Cisco SFP-10G-SR 10GBase-SR SFP+ Optical Transceiver | OEMfibers.com





The Cisco SFP-10G-SR compatible is designed to optically interoperable with IEEE 10GBase-SR reaching up to 300m over MMF at a fiber optic wavelength of 850nm using the industraial standard LC connector. It is verified to be 100% compatible with the equivalent Cisco® transceiver. All OEMfibers transceivers designed,assembled,tested and programmed in our ISO certified manufacturing facilities, Industry leading internal SOP(Standard Operating Procedure) provide confidence to our global customers to have best option to use high quality and cost effective optical transceiver products and enjoy quick and professional technical support.

评论

发表评论

此博客中的热门博文

Talk About 10GBASE-T and 10G SFP+ Transceiver Module

10GBASE-T transceiver module and SFP+ optical transceiver are two of the most widely used 10G network connectivity. 10GBASE-T Copper Transceiver Applied initially in the data centre and the horizontal cabling system,  10GBASE-T transceiver  module is a new 10GE PHY using the existing MAC (Media Access Controller). It preserves the 802.3/Ethernet frame format at the MAC Client service interface. 10GBase-T works at 100 meters for Cat6a cable and up to 50 meters for Cat6 cable. It provides flexibility, low cost transmission media, and is backward-compatible with existing 1GbE networks. 10G SFP+ Optical Transceiver 10G SFP+ transceiver can be an enhanced version of the  SFP transceiver  that supports data rates up to 16 Gbit/s. It supports 8 Gbit/s Fibre Channel, 10 Gigabit Ethernet and Optical Transport Network standard OTU2. SFP+ optical transceiver’s connector is duplex LC, and it operates on LC fibre patch leads. SFP+ transceiver is classified in different ty...
阅读全文

Notices for Installation of SFP Optical Transceivers

SFP optical transceivers is packaged in hot-swap small package. At present, the highest speed can reach 10G, and there are many LC interfaces. SFP is abbreviated as SmallForm-factorPluggable, which can be simply understood as an upgraded version of GBIC. The volume of 1000base SFP transceivers is half that of GBIC optical transceivers, and more than twice the number of ports can be configured on the same panel. 1. Turn up the pulling ring of SFP optical transceivers vertically, clamp the top buckle, and gently push the SFP optical transceivers side into the SFP slot by hand until the SFP Transceivers is in close contact with the slot (you can feel the elastic pieces at the top and bottom of the SFP optical transceivers clamping the SFP slot). 2. Wear anti-static wrist when installing/pulling out SFP optical transceivers. 3. In the absence of good grounding measures, the SFP optical transceivers should not be inserted directly, which may lead to electrostatic breakdown of electro...
阅读全文

40GBASE-LR4 CWDM and PSM QSFP+ Transceiver Links

 40GBASE-LR4 QSFP+ transceivers use two links: coarse wavelength division multiplexing (CWDM) and the other can be parallel single-mode fiber (PSM). Do you know what their differences are? There are  40GBASE-SR4 QSFP+ transceivers  and 40GBASE-LR4 QSFP+ transceivers. It’s known that 40GBASE-SR4 runs on the parallel multimode fiber (MMF) connect to achieve 40G. It offers 4 independent transmit and receive channels, each capable of 10G operation for an aggregate data rate of 40G over 100 meters of OM3 MMF or 150 meters of OM4 MMF. While for 40GBASE-LR4 QSFP+ transceivers, there are two types of links. One is certainly coarse wavelength division multiplexing (CWDM) and the other is normally parallel single-mode fiber (PSM). What’s the difference? 40GBASE-LR4 CWDM QSFP+ Transceiver QSFP-40GE-LR4, among 40GBASE-LR4 CWDM QSFP+ transceivers, is compliant to 40GBASE-LR4 of the IEEE P802.3ba standard. The optical interface is a duplex LC connector. It could support transmission di...
阅读全文