Cisco 100GBASE CFP Modules Data Sheet

 Product overview

The Cisco 100GBASE CFP modules offer customers 100 Gigabit Ethernet connectivity options for data center networking, enterprise core aggregation, and service agency transport applications.

Features and benefits

Main top features of Cisco 100GBASE CFP modules include:

Supports 100GBASE Ethernet

Hot-swappable input-output device that plugs into an Ethernet CFP port of a Cisco switch or router

Provides flexibility of interface choice

Supports "pay-as-you-populate" model

Supports Digital Optical Monitoring (DOM)

Supports the Cisco quality identification (ID) feature that allows a Cisco switch to recognize if the module can be certified and tested by Cisco

Cisco CFP-100G-LR4

The Cisco 100GBASE-LR4 CFP module supports a web link amount of 10 kilometers on standard single-mode fiber (SMF, G.652). 100 Gigabit Ethernet signal is certainly carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.

Cisco CFP-100G-SR10

The Cisco 100GBASE-SR10 CFP module supports link lengths of 100 meters and 150 meters respectively on laser-optimized OM3 and OM4 multifiber cables. It mainly enables high- bandwidth 100-gigabit links over 24-fiber ribbon cables terminated with MPO/MTP-24 connectors. It may also be found in 10 x 10 Gigabit Ethernet mode along with ribbon to duplex fiber breakout cables for connectivity to ten 10GBASE-SR optical interfaces. Maximum channel insertion loss allowed is respectively 1.9 dB over 100m of OM3 cable or 1.5 dB over 150m of OM4 cable.

Cisco CFP-100G-ER4

The Cisco 100GBASE-ER4 CFP module can support link lengths up to 40 kilometers on standard duplex single- mode fiber (SMF, G.652) terminated with SC/PC optical connectors. 100 Gigabit Ethernet signal is normally carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within these devices. The Cisco 100GBASE-ER4 CFP module meets the IEEE 802.3ba requirements for 100GBASE-ER4 performance and in addition supports Digital Optical Monitoring (DOM) of the transmit-and-receive optical signal levels.

评论

发表评论

此博客中的热门博文

Differences between cisco GLC-T and cisco GLC-TE

 Cisco GLC-T, GLC-TE and SFP-GE-T optical modules are all Gigabit port optical modules with RJ45 interface and 100m transmission distance. They are cost-saving solutions for Gigabit Ethernet connection in data center, access network and storage area network applications. Therefore, these three types of optical modules are often difficult to distinguish. In fact, the transmission effect of these three optical modules is the same, which optical module can achieve Gigabit transmission, but it is certainly noteworthy that the original Cisco GLC-T and SPF-GE-T optical modules were terminated on June 1, 2017 and replaced by GLC-TE optical module. SFP-GE-T optical module with NEBS 3 ESD function needs to be selected if it is traded directly with the telecommunications company (which requires NEBS).The price of GLC-T and GLC-TE optical modules is low, and they can also meet the needs of Gigabit Ethernet. The Cisco Gigabit optical modules provided by Easy Communications can meet a large number
阅读全文

Why the sfp transceiver not work

 The failure of the sfp optical module is divided into the failure of the transmitter and the failure of the receiver. Through the analysis of the main causes of the phenomenon, the most likely problems are mainly concentrated in the following aspects: The optical port of the  1000base SFP transceiver  is contaminated and damaged Because of the pollution and damage of the optical interface of the module, the loss of the optical link is increased, so that the optical fiber link is unreachable. The main reasons for this phenomenon are the following four points: 1. The optical port of the SFP optical module has been exposed to the environment for a long time, resulting in contamination and contamination of the SFP optical port; 2. The end face of the fiber jumper connected to the  Cisco SFP-10g-sr  optical module has been contaminated, and the SFP optical port provides been contaminated; 3. Improper operation of the end face of the optical connector with pigtails, scratching of the finish
阅读全文

OEMfibers SFP 1000BASE-SX and SFP 1000BASE-LX

 Gigabit Ethernet has been regarded as a huge breakthrough of telecom industry by offering speeds of up to 100Mbps. Gigabit Ethernet is a standard for transmitting Ethernet frames at a rate of a gigabit per second. There are five physical layer standards for Gigabit Ethernet using optical fiber (1000BASE-X), twisted pair cable (1000BASE-T), or shielded balanced copper cable (1000BASE-CX). 1000BASE-LX and  Cisco 1000BASE-SX SFP  are two common types of optical transceiver modules in the market. Today’s topic will be a brief introduction to 1000BASE-LX and 1000BASE-SX SFP transceivers. 1000BASE in these terms refers to a Gigabit Ethernet connection that uses the unfiltered cable for transmission. "X" means 4B/5B block coding for Fast Ethernet or 8B/10B block coding for Gigabit Ethernet. "L" means long-range single- or multi-mode optical cable (100 m to 10 km). “S” means short-range multi-mode optical cable (less than 100 m). 1000BASE-SX 1000BASE-SX is a fiber optic Gi
阅读全文