Juniper SFP-10GE-SR Brief Information

 This Juniper compliant SFP-10GE-SR is a 10GBASE SR SFP module. The SFP 10GE SR transceiver module combines quality with low priced and provides you a perfect alternative except for the high price transceivers. The SFP 10GE SR is 100% compatible with all Juniper series switches and modules which support SFP transceivers. This is a figure for you personally.

This SFP (mini-GBIC) transceiver module is designed for use with Juniper Networks network equipment and is the same as Juniper Networks part number Juniper SFP-10GE-SR . This transceiver was created to meet or exceed the specifications of the OEM and also to adhere to Multi-Source Agreement (MSA) standards. The product is 100% functionally tested, and compatibility is guaranteed. The transceiver is hot-swappable input/output device that allows a 10 Gigabit Ethernet port to link with a fiber optic network. OEM specific configuration data is usually loaded to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize and perform identically to an OEM transceiver. This transceiver could be mixed and deployed with other OEM or alternative party transceivers and can deliver seamless network performance. A listing of compatible network tools is on the Specs tab of the page.

SFP-10GE-SR Key Features:

1.Operating data rate up to 10.3Gbps

2.850nm VCSEL Transmitter

3.TX Power :-6~-1dBm

4.Receiver Sensitivity:-11.1dBm

5.Distance up to 300m @50 / 125 um MMF

6.Single 3.3V Power and TTL Logic Interface

7.Duplex LC Connector Interface, Hot Pluggable

8.Compliant with MSA SFP+ Specification SFF-8431

9.Compliant with IEEE 802.3ae 10GBASE-SR/SW

10.Power Dissipation < 1.0W

11.Built-in Digital Diagnostic Function

SFP-10GE-SR Applications:

10GBASE-SW at 9.953Gbps

10GBASE-SR at 10.3125Gbps

Other Optical Link

OEMfibers.com provide affordable modules here and you may look for our Juniper SFP-10GE-SR away from expectation, Our module transceivers are tested internal just before shipping to insure that they can get to perfect physical and working condition

评论

发表评论

此博客中的热门博文

Differences between cisco GLC-T and cisco GLC-TE

 Cisco GLC-T, GLC-TE and SFP-GE-T optical modules are all Gigabit port optical modules with RJ45 interface and 100m transmission distance. They are cost-saving solutions for Gigabit Ethernet connection in data center, access network and storage area network applications. Therefore, these three types of optical modules are often difficult to distinguish. In fact, the transmission effect of these three optical modules is the same, which optical module can achieve Gigabit transmission, but it is certainly noteworthy that the original Cisco GLC-T and SPF-GE-T optical modules were terminated on June 1, 2017 and replaced by GLC-TE optical module. SFP-GE-T optical module with NEBS 3 ESD function needs to be selected if it is traded directly with the telecommunications company (which requires NEBS).The price of GLC-T and GLC-TE optical modules is low, and they can also meet the needs of Gigabit Ethernet. The Cisco Gigabit optical modules provided by Easy Communications can meet a large number
阅读全文

Cisco 10GBASE SFP+ Modules Data Sheet

 Product overview The Cisco 10GBASE SFP+ modules offer you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Features and benefits Cisco SFP+ modules offer the following features and benefits. Industry’s smallest 10G form factor for greatest density per chassis Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing) Supports “pay-as-you-populate” model for investment protection and ease of technology migration Digital optical monitoring capability for strong diagnostic capabilities Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco Cisco SFP-10G-SR-S module (S-Class) The Cisco 10GBASE-SR module supports a link length of 26 meter
阅读全文

Why the sfp transceiver not work

 The failure of the sfp optical module is divided into the failure of the transmitter and the failure of the receiver. Through the analysis of the main causes of the phenomenon, the most likely problems are mainly concentrated in the following aspects: The optical port of the  1000base SFP transceiver  is contaminated and damaged Because of the pollution and damage of the optical interface of the module, the loss of the optical link is increased, so that the optical fiber link is unreachable. The main reasons for this phenomenon are the following four points: 1. The optical port of the SFP optical module has been exposed to the environment for a long time, resulting in contamination and contamination of the SFP optical port; 2. The end face of the fiber jumper connected to the  Cisco SFP-10g-sr  optical module has been contaminated, and the SFP optical port provides been contaminated; 3. Improper operation of the end face of the optical connector with pigtails, scratching of the finish
阅读全文