OEMfibers 100G QSFP28 transceivers types

 The QSFP28 transceiver belongs to a mainstream 100G optical module currently on the market. The QSFP28 optical module provides four channels of different signals, and the transmission rate is increased from 25 Gbps to 40 Gbps. The QSFP28 optical module is smaller than other 100G modules, so it is receiving more and more attention. The 100G QSFP28 optical module has been derived from several categories, each with different optical module standards and ideal for different transmission applications. This article will teach you to identify these conventional 100G QSFP28 transceiver.

Cisco QSFP-100G-SR4 Optical Module

Since most of the data centers use multimode fiber, IEEE has developed a standard for 100G QSFP28 optical modules that supports multimode fiber short-distance transmission applications: 100GBASE-SR4. 100G QSFP28 SR4 optical module uses MTP interface (8-core) ), the transmission distance, when used with OM3 multimode fiber, is usually 70m, and the transmission distance, when used in combination with OM4 multimode fiber, the transmission distance is definitely 100m.

100G QSFP28 LR4 optical module

For 100G long-distance transmission, IEEE also developed the 100GBASE-LR4 standard for 100G QSFP28 optical modules. The 100G QSFP28 LR4 optical module also uses four fiber channels. The difference can be that it introduces WDM technology, which can multiplex the different wavelengths of four fiber channels onto one fiber for transmission. Therefore, the 100G QSFP28 LR4 optical module uses The duplex LC interface can be used up to 10km when used with single mode fiber.

100G QSFP28 PSM4 optical module

The 100G-PSM4 is a multi-source protocol (MSA) developed primarily for 100G QSFP28 optical modules. The 100G QSFP28 PSM4 optical module is mainly used for medium and long-distance transmission applications. It uses an MTP interface (8-core) and may transmit up to 500m when used in combination with single-mode multi-core fiber.

100G QSFP28 CWDM4 optical module

100G-CWDM4 is also a multi-source protocol (MSA). The JUNIPER QSFP-100G-CWDM4 optical module also introduces WDM technology. It adopts the duplex LC interface. When used together with single-mode fiber, the transmission distance can reach 2km, and its transmission distance is certainly 100G. The QSFP28 CWDM4 optical module is normally short and the price is much cheaper.

评论

发表评论

此博客中的热门博文

Differences between cisco GLC-T and cisco GLC-TE

 Cisco GLC-T, GLC-TE and SFP-GE-T optical modules are all Gigabit port optical modules with RJ45 interface and 100m transmission distance. They are cost-saving solutions for Gigabit Ethernet connection in data center, access network and storage area network applications. Therefore, these three types of optical modules are often difficult to distinguish. In fact, the transmission effect of these three optical modules is the same, which optical module can achieve Gigabit transmission, but it is certainly noteworthy that the original Cisco GLC-T and SPF-GE-T optical modules were terminated on June 1, 2017 and replaced by GLC-TE optical module. SFP-GE-T optical module with NEBS 3 ESD function needs to be selected if it is traded directly with the telecommunications company (which requires NEBS).The price of GLC-T and GLC-TE optical modules is low, and they can also meet the needs of Gigabit Ethernet. The Cisco Gigabit optical modules provided by Easy Communications can meet a large number
阅读全文

Cisco 10GBASE SFP+ Modules Data Sheet

 Product overview The Cisco 10GBASE SFP+ modules offer you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Features and benefits Cisco SFP+ modules offer the following features and benefits. Industry’s smallest 10G form factor for greatest density per chassis Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing) Supports “pay-as-you-populate” model for investment protection and ease of technology migration Digital optical monitoring capability for strong diagnostic capabilities Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco Cisco SFP-10G-SR-S module (S-Class) The Cisco 10GBASE-SR module supports a link length of 26 meter
阅读全文

Why the sfp transceiver not work

 The failure of the sfp optical module is divided into the failure of the transmitter and the failure of the receiver. Through the analysis of the main causes of the phenomenon, the most likely problems are mainly concentrated in the following aspects: The optical port of the  1000base SFP transceiver  is contaminated and damaged Because of the pollution and damage of the optical interface of the module, the loss of the optical link is increased, so that the optical fiber link is unreachable. The main reasons for this phenomenon are the following four points: 1. The optical port of the SFP optical module has been exposed to the environment for a long time, resulting in contamination and contamination of the SFP optical port; 2. The end face of the fiber jumper connected to the  Cisco SFP-10g-sr  optical module has been contaminated, and the SFP optical port provides been contaminated; 3. Improper operation of the end face of the optical connector with pigtails, scratching of the finish
阅读全文