Features and applications of 25G DAC and 25G AOC active optical cable

 What are the characteristics of using 25G high-speed cable and 25G active optical cable ?

1.25G SFP28 DAC high speed cable:

25G high-speed cable can support transmission rates of up to 25Gbps, which is higher than traditional copper cables.

25G active fiber optic cable for 25G and 10G Ethernet, high-capacity IO and SFP+ interfaces, data center and rack-to-rack connectivity.

2.25G SFP28 AOC active optical cable:

25G active fiber optic cable is one-half and one-quarter of the 25G high-speed cable, so 25G active fiber optic cable is much lighter than 25G high-speed cable; no products upgrade is required, 25G active optical cable has up to 25G 25Gbps throughput; 25G active optical cable offers better transmission performance and bit error rate, BER can reach 10-15; 25G active optical cable provides lower transmission power on the system link.

25G DAC high speed cable and 25G AOC active cable application

25G high-speed cables are mainly used in switches/routers/HBAs, servers and data storage devices, 40Gbs/100GBS Ethernet, and Fibre Channel.

25G active fiber optic cable for 25G and 10G Ethernet, high-capacity IO and SFP+ interfaces, data center and rack-to-rack connectivity.

评论

发表评论

此博客中的热门博文

Differences between cisco GLC-T and cisco GLC-TE

 Cisco GLC-T, GLC-TE and SFP-GE-T optical modules are all Gigabit port optical modules with RJ45 interface and 100m transmission distance. They are cost-saving solutions for Gigabit Ethernet connection in data center, access network and storage area network applications. Therefore, these three types of optical modules are often difficult to distinguish. In fact, the transmission effect of these three optical modules is the same, which optical module can achieve Gigabit transmission, but it is certainly noteworthy that the original Cisco GLC-T and SPF-GE-T optical modules were terminated on June 1, 2017 and replaced by GLC-TE optical module. SFP-GE-T optical module with NEBS 3 ESD function needs to be selected if it is traded directly with the telecommunications company (which requires NEBS).The price of GLC-T and GLC-TE optical modules is low, and they can also meet the needs of Gigabit Ethernet. The Cisco Gigabit optical modules provided by Easy Communications can meet a large number
阅读全文

Cisco 10GBASE SFP+ Modules Data Sheet

 Product overview The Cisco 10GBASE SFP+ modules offer you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Features and benefits Cisco SFP+ modules offer the following features and benefits. Industry’s smallest 10G form factor for greatest density per chassis Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing) Supports “pay-as-you-populate” model for investment protection and ease of technology migration Digital optical monitoring capability for strong diagnostic capabilities Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco Cisco SFP-10G-SR-S module (S-Class) The Cisco 10GBASE-SR module supports a link length of 26 meter
阅读全文

Why the sfp transceiver not work

 The failure of the sfp optical module is divided into the failure of the transmitter and the failure of the receiver. Through the analysis of the main causes of the phenomenon, the most likely problems are mainly concentrated in the following aspects: The optical port of the  1000base SFP transceiver  is contaminated and damaged Because of the pollution and damage of the optical interface of the module, the loss of the optical link is increased, so that the optical fiber link is unreachable. The main reasons for this phenomenon are the following four points: 1. The optical port of the SFP optical module has been exposed to the environment for a long time, resulting in contamination and contamination of the SFP optical port; 2. The end face of the fiber jumper connected to the  Cisco SFP-10g-sr  optical module has been contaminated, and the SFP optical port provides been contaminated; 3. Improper operation of the end face of the optical connector with pigtails, scratching of the finish
阅读全文