There are 8 measures to set up a 40G QSFP+ transceiver.

 The QSFP+ transceiver module is certainly a static-sensitive device. So, we always utilize an ESD wrist strap or similar individual grounding device when handling QSFP+ transceiver modules or getting into connection with system modules. Besides, the Cisco QSFP-40G-LR4 module can have the bail-clasp latch or a pull-tab latch. In this text, installation procedures for both types of latches can be found. These 8 measures are as pursuing:

Step one 1: Attach an ESD wrist strap to yourself and an adequately grounded stage on the chassis or the rack.

Step two 2: Take away the QSFP+ transceiver module from its protective packaging.

Step three 3: Check the label on the QSFP+ transceiver module body to verify that you have the right model for your network.

Step 4: For optical QSFP+ transceivers, remove the optical bore dust plug and set it aside.

Step 5: For transceivers equipped with a bail-clasp latch:

a. Keep carefully the bail-clasp aligned in a vertical position.

b. Align the QSFP+ transceiver in front of the module’s transceiver socket opening and carefully slide the QSFP+ transceiver in to the socket until the transceiver makes contact with the socket electrical connector.

Step 6: For QSFP+ transceivers built with a pull-tab:

a. Contain the transceiver to ensure that the identifier label is normally at the top.

b. Align the QSFP+ transceiver before the module’s transceiver socket opening and carefully slide the Juniper QFX-QSFP-40G-SR4 into the socket before transceiver makes connection with the socket electrical connector.

Step 7: Press firmly on leading of the QSFP+ transceiver together with your thumb to totally seat the transceiver in the module’s transceiver socket.

Step 8: For optical QSFP+ modules, reinstall the dust plug in to the QSFP+ transceivers optical bore until you are ready to attach the network interface cable. Usually do not take away the dust plug until you will be ready to attach the network interface cable.Learn:wwww.oemfibers.com

评论

发表评论

此博客中的热门博文

Differences between cisco GLC-T and cisco GLC-TE

 Cisco GLC-T, GLC-TE and SFP-GE-T optical modules are all Gigabit port optical modules with RJ45 interface and 100m transmission distance. They are cost-saving solutions for Gigabit Ethernet connection in data center, access network and storage area network applications. Therefore, these three types of optical modules are often difficult to distinguish. In fact, the transmission effect of these three optical modules is the same, which optical module can achieve Gigabit transmission, but it is certainly noteworthy that the original Cisco GLC-T and SPF-GE-T optical modules were terminated on June 1, 2017 and replaced by GLC-TE optical module. SFP-GE-T optical module with NEBS 3 ESD function needs to be selected if it is traded directly with the telecommunications company (which requires NEBS).The price of GLC-T and GLC-TE optical modules is low, and they can also meet the needs of Gigabit Ethernet. The Cisco Gigabit optical modules provided by Easy Communications can meet a large number
阅读全文

Cisco 10GBASE SFP+ Modules Data Sheet

 Product overview The Cisco 10GBASE SFP+ modules offer you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Features and benefits Cisco SFP+ modules offer the following features and benefits. Industry’s smallest 10G form factor for greatest density per chassis Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing) Supports “pay-as-you-populate” model for investment protection and ease of technology migration Digital optical monitoring capability for strong diagnostic capabilities Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco Cisco SFP-10G-SR-S module (S-Class) The Cisco 10GBASE-SR module supports a link length of 26 meter
阅读全文

Why the sfp transceiver not work

 The failure of the sfp optical module is divided into the failure of the transmitter and the failure of the receiver. Through the analysis of the main causes of the phenomenon, the most likely problems are mainly concentrated in the following aspects: The optical port of the  1000base SFP transceiver  is contaminated and damaged Because of the pollution and damage of the optical interface of the module, the loss of the optical link is increased, so that the optical fiber link is unreachable. The main reasons for this phenomenon are the following four points: 1. The optical port of the SFP optical module has been exposed to the environment for a long time, resulting in contamination and contamination of the SFP optical port; 2. The end face of the fiber jumper connected to the  Cisco SFP-10g-sr  optical module has been contaminated, and the SFP optical port provides been contaminated; 3. Improper operation of the end face of the optical connector with pigtails, scratching of the finish
阅读全文