Routine knowledge of OEMfibers Optical Transceiver

 The composition of the Optical Transceiver: There are launching excitation (TOSA), getting (ROSSA) circuit board IC external accessories

The Optical Transceiver interface is divided into FC type, SC type, LC type, ST type and FTRJ type. RJ45

Optical Transceiver classification

According to the rate: 100Base (100M), 1000Base (Gigabit) for Ethernet applications, 155M, 622M, 2.5G, 10G for 10GE SDH applications

Based on the package: 1×9, SFF, SFP, GBIC SFP+ XFP X2 XENPAK

1×9 package-welding type optical module, general speed is 52M/155M/622M/1.25G, and SC interface is mostly used

SFF package-welding small package optical module, the overall rate is 155M/622M/1.25G/2.25G/4.25G, mostly using LC interface

GBIC package-hot-swappable Gigabit interface optical module, using SC interface

SFP package-hot-swappable small package modules, the existing highest data rate can reach 155M/622M/1.25G/2.125G/4.25G/8G/10G, mostly using LC interface

XENPAK package-used in 10 Gigabit Ethernet, using SC interface

XFP package-10G Optical Transceiver, can be utilized in 10 Gigabit Ethernet, SONET and other systems, mostly using LC interface

According to laser type: LED, VCSEL, FP LD, DFB LD

According to the emission wavelength: 850nm, 1310nm, 1550nm, etc.

Based on the mode useful: non-hot pluggable (1×9, SFF), hot pluggable (GBIC, SFP, XENPAK, XFP)

Fiber optic modules are split into single-mode and multi-mode

The wavelength of light used by single-mode fiber is 1310nm or 1550nm. How big is single-mode fiber is 9-10/125μm, and its transmission distance is normally 10KM 20kM 40KM 70KM 120KM

The light wavelength utilized by multimode fiber is mainly 850 nm or 1310nm. Multimode fiber is 50/125μm or 62.5/125μm, and its own transmission distance differs. Generally, 50/125μm line can transmit 550M, 62.5/ in Gigabit environment. 125μm can only just transmit 330M. (2KM 550M)

Single-mode fiber and multi-mode fiber could be distinguished from color. The outer body of single-mode fiber is usually yellow, and the outer body of multi-mode fiber is orange-red.

The electrical frequency of the optical fiber module: PECL Current: 18 mA, voltage: 3.3V, 5V, temperature: 0~70, -40~70 (industrial grade)

Some commonly used symbols for Optical Transceiver: HP J4858D (850nm 550M) LX SM (1310nm 15KM) LHSM (1310nm 40km) ZX (1550nm 70KM) EZX (1550nm120KM) SR LR ER ZR.Learn:www.oemfibers.com

评论

发表评论

此博客中的热门博文

What are the types of long-distance transceiver modules?

Among SFP , SFP+ , XFP , 40G, and  100G transceiver modules  , there are long-distance transceiver modules. Among them, the long-distance SFP+ optical module uses EML laser parts and photodetector components. Various improvements have reduced the power consumption of the optical module and improved accuracy; the long-distance 40G optical module uses a driver and modulation unit in the transmit link to receive The link uses an optical amplifier and a photoelectric conversion unit, which can achieve a maximum transmission distance of 80km, which is far greater than the optical transmission distance of the existing standard 40G pluggable optical module. In the actual usage of long-distance transceiver modules, in many cases, the maximum transmission distance of the module cannot be reached. The reason being a specific degree of dispersion will occur during the transmission of optical signals in the optical fiber. To solve this problem, long-distance transceiver modules use Only...
阅读全文

Talk About 10GBASE-T and 10G SFP+ Transceiver Module

10GBASE-T transceiver module and SFP+ optical transceiver are two of the most widely used 10G network connectivity. 10GBASE-T Copper Transceiver Applied initially in the data centre and the horizontal cabling system,  10GBASE-T transceiver  module is a new 10GE PHY using the existing MAC (Media Access Controller). It preserves the 802.3/Ethernet frame format at the MAC Client service interface. 10GBase-T works at 100 meters for Cat6a cable and up to 50 meters for Cat6 cable. It provides flexibility, low cost transmission media, and is backward-compatible with existing 1GbE networks. 10G SFP+ Optical Transceiver 10G SFP+ transceiver can be an enhanced version of the  SFP transceiver  that supports data rates up to 16 Gbit/s. It supports 8 Gbit/s Fibre Channel, 10 Gigabit Ethernet and Optical Transport Network standard OTU2. SFP+ optical transceiver’s connector is duplex LC, and it operates on LC fibre patch leads. SFP+ transceiver is classified in different ty...
阅读全文

OEMfibers QSFP28 CWDM4 Optical Module Overview

 100G CWDM4 is also a multi-source protocol (MSA). The 100G CWDM4 optical module introduces WDM technology and uses a duplex LC interface. When used with single-mode fiber, the transmission distance can reach 2km. The transmission rate of the 100G QSFP28 CWDM4 optical module is 103.1Gbp, which is mainly used in computing, high-frequency trading and other fields. Its cost is definitely significantly higher than that of the QSFP28PSM4 optical module. Through coarse wavelength division multiplexing (CWDM) technology, the  QSFP28 CWDM4 modules  multiplexes four wavelengths of 1270nm, 1290nm, 1310nm and 1330nm onto a single mode fiber for transmission. 1.Optical module package The optical module package found in the 100G QSFP28 CWDM4 optical module is QSFP28, which is an optical module that can be used to support 100G transmission. It provides an ideal solution for the ever-increasing transmission rate of ultra-large data centers. The package size of QSFP28 optical modules can...
阅读全文