OEMfibers CFP-100G-SR10 and CFP-100G-LR4 Overview

 100G CFP modules offer connectivity options for an array of service agency transport, data center networking, and enterprise core aggregation applications. The essential information of CFP-100G-SR10 and Cisco CFP-100G-LR4 module is provided below.

CFP-100G-SR10 Module

CFP-100G-SR10 can be an IEEE standardized CFP module supporting link lengths of 100 m and 150 m respectively on laser-optimized OM3 and OM4 multifiber cables. It mainly allows high-bandwidth 100-gigabit links over 24-fiber ribbon cables terminated with MPO/MTP-24 connectors. It may also be found in 10 x 10 Gigabit Ethernet mode along with ribbon to duplex fiber breakout cables for connectivity to ten 10GBASE-SR optical interfaces. CFP-100G-SR10 interface serves as a far more cost-effective solution, which can be optimized for data center application and is bound to short distances.

CFP-100G-LR4 Module

CFP-100G-LR4 is standardized by IEEE using standard LC dual fiber interface with single-mode cable, but running four optical wavelengths each direction (1295.56 nm, 1300.05 nm,1304.59 nm, 1309.14 nm) and muxing/demuxing of the wavelengths happening inside CFP module. Each wavelength is certainly running at 25.78 Gbps in fact it is possible to achieve up to 10 km. In comparison to CFP-100G-SR10, CFP-100G-LR4 provides much better grab long-haul applications, but at a price premium.

Comparison Between CFP-100G-SR10 and CFP-100G-LR4

In this section, we’re racking your brains on the difference between Cisco CFP-100G-SR10 and CFP-100G-LR4 from the perspective of connectors and cabling applied to each. For connectors, 24-fiber MPO/MTP connector is normally for CFP-100G-SR10 module while dual SC/PC connector for CFP-100G-LR4. Remember that only patch cords with PC or UPC connectors are supported. The cabling specification and features for CFP-100G-SR10 and CFP-100G-LR4 are presented on OEMfibers.com

评论

发表评论

此博客中的热门博文

Differences between cisco GLC-T and cisco GLC-TE

 Cisco GLC-T, GLC-TE and SFP-GE-T optical modules are all Gigabit port optical modules with RJ45 interface and 100m transmission distance. They are cost-saving solutions for Gigabit Ethernet connection in data center, access network and storage area network applications. Therefore, these three types of optical modules are often difficult to distinguish. In fact, the transmission effect of these three optical modules is the same, which optical module can achieve Gigabit transmission, but it is certainly noteworthy that the original Cisco GLC-T and SPF-GE-T optical modules were terminated on June 1, 2017 and replaced by GLC-TE optical module. SFP-GE-T optical module with NEBS 3 ESD function needs to be selected if it is traded directly with the telecommunications company (which requires NEBS).The price of GLC-T and GLC-TE optical modules is low, and they can also meet the needs of Gigabit Ethernet. The Cisco Gigabit optical modules provided by Easy Communications can meet a large number
阅读全文

Cisco 10GBASE SFP+ Modules Data Sheet

 Product overview The Cisco 10GBASE SFP+ modules offer you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Features and benefits Cisco SFP+ modules offer the following features and benefits. Industry’s smallest 10G form factor for greatest density per chassis Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing) Supports “pay-as-you-populate” model for investment protection and ease of technology migration Digital optical monitoring capability for strong diagnostic capabilities Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco Cisco SFP-10G-SR-S module (S-Class) The Cisco 10GBASE-SR module supports a link length of 26 meter
阅读全文

Why the sfp transceiver not work

 The failure of the sfp optical module is divided into the failure of the transmitter and the failure of the receiver. Through the analysis of the main causes of the phenomenon, the most likely problems are mainly concentrated in the following aspects: The optical port of the  1000base SFP transceiver  is contaminated and damaged Because of the pollution and damage of the optical interface of the module, the loss of the optical link is increased, so that the optical fiber link is unreachable. The main reasons for this phenomenon are the following four points: 1. The optical port of the SFP optical module has been exposed to the environment for a long time, resulting in contamination and contamination of the SFP optical port; 2. The end face of the fiber jumper connected to the  Cisco SFP-10g-sr  optical module has been contaminated, and the SFP optical port provides been contaminated; 3. Improper operation of the end face of the optical connector with pigtails, scratching of the finish
阅读全文